METATRADER · TWS · TRADINGVIEW → INTERACTIVE BROKERS · METATRADER
Copy MetaTrader, TWS and TradingView orders to every IBKR and MetaTrader account you run.
The New Order Copier takes orders from MetaTrader 4, MetaTrader 5, IBKR TWS logins, TradingView alerts and your own programs through the Signal API. It places them on Interactive Brokers accounts through TWS or IB Gateway, on MetaTrader 4 and MetaTrader 5 accounts, and on the copiers of your clients. Stops and targets travel with every order.
| source ↓ / target → | TWS login 1account A | TWS login 1account B | IB Gateway 2FA group |
|---|---|---|---|
| MT5 terminaltrend EA | copying×1.0 | copying×0.5 | off |
| MT4 terminalmanual | off | copying×1.0 | copyingbalance ratio |
| TWS login 3IB → IB | copying×2.0 | off | copying×1.0 |
Demo: MetaTrader and TWS orders copied to Interactive Brokers.
MetaTrader 5, a Trader Workstation and the Signal API send limit and market orders with stop loss, take profit and brackets; the copier places them on two Interactive Brokers targets: a single account and a Financial Advisor account. Subtitles in 10 languages.
Clicking loads the video from YouTube (youtube-nocookie.com). YouTube receives data such as your IP address. Privacy
What it copies: order types, stop loss and take profit, size.
| ORDER TYPES | Market orders and every MetaTrader 5 pending type: buy/sell limit, stop and stop limit. A stop stays a stop. |
|---|---|
| STOP LOSS / TAKE PROFIT | Copied, changed and removed with the source, including SL/TP attached to pending orders. |
| NET PROTECTION | With opposing positions (hedging accounts, MT4) the broker gets one protective bracket sized to the net position: a stop never adds to a position. |
| POSITION CHANGES | Partial closes, close-by and position changes. |
| SIZE | Per source/target pair: a multiplier or a balance ratio. |
| SYMBOL MAPPING | You choose which IBKR contract a MetaTrader symbol trades, with a size factor per contract. |
| METATRADER TARGETS | Market, limit and stop orders; stop limit on MetaTrader 5. On hedging accounts and MT4 every position gets its own SL/TP. Positions opened by hand or by other sources are never touched. |
| DOWNTIME | Changes made while the copier was off are replayed on reconnect; a position opened and closed in between is not copied. |
MetaTrader, TWS, TradingView and your own signals, to IBKR, MetaTrader and your clients' copiers.
Send orders to accounts behind different TWS or IB Gateway logins at the same time, including Financial Advisor sub-accounts and allocation groups.
Orders also go to MetaTrader accounts: an executor EA on one chart per account places them. Stop loss and take profit become the position's own SL/TP. MetaTrader to MetaTrader keeps the symbol, 1 lot = 1 lot times the connector's multiplier; from Interactive Brokers a mapping table sets symbol and lots per contract.
Mirror one Interactive Brokers account to others: IB to IB, in the same routing matrix as your MetaTrader terminals.
Strategy and indicator alerts become orders on your accounts. How it works →
Any program, script or MetaTrader indicator/EA sends orders as a source of its own, without a source account: four JSON commands over WebSocket or webhook, with the same routing, sizing and safety. Technical details →
A group of receiving copiers is one target in your routing matrix; your connector decides which sources the group receives. Each client copier connects over TLS with its own access token, bound to one group; only the token's hash is stored. On the client's side the group is a source like any other, and the client's own connector is the switch. A source you take out of a group only reduces positions there until flat.
One switch and one size rule per source/target pair: a multiplier or a balance ratio.
An account can be configured as a source and as a target, but only one of the two can be active. A second activation is refused with the reason.
TradingView: strategy alerts become orders at Interactive Brokers.
A TradingView strategy or indicator alert becomes a real order on your Interactive Brokers account (TWS or IB Gateway), placed by the New Order Copier on your own computer.
Each alert carries the strategy's position. The copier sends only the difference to what it has already sent: a repeated alert sends nothing, a missed alert is corrected by the next one, and a reversal from long to short is handled in one alert.
One TradingView source can feed several Interactive Brokers accounts. Symbol, contract and size per account come from the copier's mapping table, e.g. 1 TradingView unit = N contracts.
TradingView can only call a public internet address. The copier therefore connects outbound to the trade-commander relay (relay.trade-commander.com, the default setting), which hands each alert only to the copier that holds its token. Included with every copier, no extra fee, nothing to install. It accepts alerts only from TradingView's published server addresses; both legs are encrypted (HTTPS / TLS). The relay server is located in Oregon (US West), the region TradingView sends its webhooks from. A custom relay server is possible: the relay address is a setting.
Our guarantee: trade-commander does not log, store or analyse your signals. The relay reads only the token to find your copier and forwards the alert at once; the alert content is never written to disk, never logged, never evaluated. Tokens are held only as one-way hashes in memory and never logged. The signal is processed only on your own computer, by your copier.
| REQUIREMENTS | Two-factor login enabled at TradingView: TradingView refuses webhooks without it. A paid TradingView plan with webhooks. The New Order Copier running while alerts arrive. |
|---|---|
| SETUP | 1. In the copier: New Source → TradingView. The copier shows the webhook URL and a ready message text, each with a Copy button. 2. In TradingView: create one alert on the strategy ("order fills"), paste the message unchanged, tick "Webhook URL" and paste the URL. 3. In the copier: switch on the connector to the broker account and choose the mapping table. Every order of the strategy is now copied. No open port, no router or firewall change, no own server, no certificate. |
| SPEED, COPIER SIDE | From the moment TradingView's webhook arrives, the order is at the broker in under 0.5 s (measured). |
| SPEED, TRADINGVIEW SIDE | Not in our hands: TradingView typically needs about 4 s from the signal to sending the webhook, sometimes 10 s, rarely 30–40 s (independent measurement of 34,174 alerts, tv-hub.org 2026; our own tests: 1–37 s). No receiver can shorten this. |
| SUITED FOR | Strategies on 5-minute charts and higher. Not for scalping or 1-minute and seconds charts. |
| SECURITY | The token in the alert message is the only key: keep it secret and never post it. One click on "New token" replaces it; all old alerts stop at once. |
It is lost: TradingView does not resend a failed webhook. The next alert sets the position right again.
No. They arrive as the position change they cause, not as resting orders at the broker.
Yes, but you type the position into the alert message by hand: 1, 0 or -1.
Safety: drawdown protection per account and emergency stop.
A maximum drawdown, with trailing, for each target account. When it is hit, the copier cancels that account's orders and closes its positions.
One action, after a confirmation: disables every connection, stops the sources, cancels all orders and closes all positions on every target.
A MetaTrader terminal, as a source or a target, can only attach with a token you created. Nobody else's terminal can place orders on your accounts.
Every order the copier did not copy is recorded with the reason. Every order the broker refused is recorded with the broker's code. Every order can be traced step by step, from arrival to execution, with its latencies.
Pro edition: performance report and ranking per source.
For traders who run several EAs, signal sources or accounts and have to decide which ones to keep.
Per source: what it traded, at its own prices – including signals that were never copied. Net, profit factor, win rate, maximum drawdown, expectancy, Sharpe and more, by symbol, time and direction. Also in the layout of the MetaTrader strategy tester report; the trade list as CSV.
All sources on one page, ranked by a t-statistic on R-multiples (R = a trade's result ÷ its initial risk): a long, steady record counts for more than a few lucky trades. Noise and records that are too short are marked. Suspend a source by hand and resume it later.
An AI reads the reports and gives each source a verdict: keep, watch or stop. It advises and never trades; off by default. Needs your own AI: a local model server (e.g. Ollama or LM Studio) or your own API key (OpenRouter, OpenAI, Anthropic, Google Gemini, Grok) – not included in the price. With a local model nothing leaves your computer.
Pricing per target account, with a 60-day return.
60-day return right on every purchase: full refund, no reasons needed.
A target account is an Interactive Brokers or MetaTrader account the copier places orders on. Sources, terminals and installations are not counted. A TWS login that trades 5 accounts uses 5 target accounts. A Client Mode group counts as one target account while a copier of it is connected; each client licenses the accounts of their own copier.
Standard
- MT4, MT5, TWS logins, TradingView and the Signal API as sources
- Any number of IBKR targets, incl. FA, and MetaTrader 4/5 targets
- Routing matrix, sizing, symbol mapping
- Account protection, emergency stop
- Order journal and trace
✓ 60-day return – full refund, no reasons needed
Pro
- Everything in Standard
- Performance report per source
- Σ-Report ranking of all sources
- Optional AI reading: keep / watch / stop per source (needs a local AI or your own API key, not included in the price)
- Publish the Σ-Report without account numbers
✓ 60-day return – full refund, no reasons needed
Custom sources and FIX endpoints on request.
Need a source integration beyond MetaTrader, TWS, TradingView and the Signal API - your own platform, an OMS - or a target over FIX? We build it as a project: scope, price and support in a separate contract, invoiced directly, outside the Digistore24 shop.
Request a projectOperation and requirements: Windows or Linux, operated in the browser.
Sources, targets, routing, symbol mapping, open orders, executions, positions and the IB account: balances and margin per target login, also per FA sub-account.
As a Windows service, without a logged-in user, or as a Linux service on your own server or VPS.
The web frontend answers on the local machine only. From another computer you reach it through an SSH tunnel.
Operator and viewer users. The emergency stop asks for the password again. The web frontend keeps an audit log.
| OPERATING SYSTEM | Windows 10 version 1903 or newer, Windows 11 or Windows Server 2022 or newer, 64-bit. Linux 64-bit (x86-64) with glibc 2.38 or newer, e.g. Ubuntu 24.04 or Debian 13, as a .deb package or archive. The copier runs as a service and is operated in the browser. |
|---|---|
| LANGUAGES | Program and help in 10 languages: English, plus nine machine translations. The help has a full-text search. |
| BROKER SIDE | Interactive Brokers targets: an Interactive Brokers account and a running TWS or IB Gateway with the API enabled. MetaTrader targets: a running MetaTrader 4 or MetaTrader 5 terminal with the target EA on one chart per account. |
| METATRADER | MetaTrader 4 or MetaTrader 5 terminal on Windows, as a source or a target. The installer finds your terminals and installs the components they need. With the copier on Linux, the terminal connects over the TLS remote port. |
| INSTALLATION | The Windows setup is digitally signed. |
| LICENCE CHECK | Internet access to the licence server. If it cannot be reached, the copier keeps running for a grace period. |
New Order Copier FAQ.
Targets are served in the order they connected. A target that does not fit receives no new entries, but everything it already holds keeps being managed: stops, changes and closes.
Yes. Installations of one licence share its target accounts.
Interactive Brokers accounts through TWS or IB Gateway, and MetaTrader 4 and MetaTrader 5 accounts through the target EA in their terminal. For FIX connectivity, ask us.
No. The New Order Copier is software that you run on your own computer, on your own accounts. We do not provide signals, manage accounts or place trades for you.
Only if you allow it. The AI reading is off by default and uses a local model first. A cloud provider is used only after your consent, with your own key.
Risk disclaimer. Trading involves a risk of loss. The New Order Copier is software; it is not investment advice and makes no promise of results. Past results are no guarantee of future results.
Trademarks. MetaTrader is a trademark of MetaQuotes Ltd. Interactive Brokers, IBKR, TWS and IB Gateway are trademarks of Interactive Brokers LLC. TradingView is a trademark of TradingView, Inc. The New Order Copier works with these platforms; it is not affiliated with, endorsed or sponsored by any of these companies.
Checkout, payment and invoicing by Digistore24.